(Summary) getting solaris 9 to use eri0

From: Paul <pawos_at_excite.com>
Date: Mon Jan 12 2004 - 14:41:25 EST
Thanks all who responded.  Sometimes it's a combination of replies that helps the best.  Had a combination of things missconfigured including the netmask.  And the plumb command and eri0 up worked to bring it up and all is good.

so check:

and ifconfig eri0 plumb
ifconfig eri0 up

Thanks all!

 --- On Mon 01/12, Paul < pawos@excite.com > wrote:
From: Paul [mailto: pawos@excite.com]
To: sunmanagers@sunmanagers.org
Date: Mon, 12 Jan 2004 10:41:41 -0500 (EST)
Subject: getting solaris 9 to use eri0

What file do I have to hakc to get a solaris 9 system to use eri0 or the hostname and IP to use it?  I have the hostname and IP configured but is not putting that information on the ethernet interface.  I do ifconfig -a and it show the eri0 but the info is not in there.  The way we ended up there is restoring from a similar system then changing all the info.  And this is what we have left to change is to point all that info to eri0.  Also tried a touch /reconfigure and no worky.  Thanks.<br>The most personalized portal on the Web!<br>_______________________________________________<br>sunmanagers mailing list<br>sunmanagers_at_sunmanagers.org<br>http://www.sunmanagers.org/mailman/listinfo/sunmanagers<br>
The most personalized portal on the Web!
sunmanagers mailing list
Received on Mon Jan 12 14:41:21 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:27 EST