Hi Guru's, Lotsa Thanks to Eric van de Meerakker and Walter Heukels for their contribution. It was a rather simple solution. Since there were no metadb's left, I created new ones on the appropiate slices, and copied the raid set into the md.tab (from the old md.tab), with the -k option at the end. So it looked like this: d100 -r /dev/dsk/c2t1d0s0 /dev/dsk/c2t2d0s0 /dev/dsk/c2t3d0s0 /dev/dsk/c3t0d0s0 /dev/dsk/c3t1d0s0 \ /dev/dsk/c4t0d0s0 /dev/dsk/c4t1d0s0 /dev/dsk/c4t2d0s0 /dev/dsk/c4t3d0s0 /dev/dsk/c5t0d0s0 \ /dev/dsk/c5t1d0s0 /dev/dsk/c5t2d0s0 /dev/dsk/c5t3d0s0 -k After that, I gave a metainit d100 on the commandline, and some moments later, it came back with a prompt and a message that the RAID was setup ! All data was preserved. Ofcourse I removed the -k option afterwards. Thanks again ! Andy Kannberg System Engineer SPIRIT UNIX group LG Philips Displays Eindhoven The Netherlands tel: 040 - 2789265 fax: 040 - 2785405 email: Andy.Kannberg@LGPhilips-Displays.com _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Mon May 5 09:22:50 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:10 EST