Hi Managers, I asked: I am tryin to setup a home network with Ultra10/Redhat8/Wn98se with a Linksys EZX5SSW 5 port switch. Switch is autosencing 10/100. After I have connected my Redhat8 and Ultra10 to the switch I try to ping from redhat to U10 or vice-versa and I get host unreachable. My Redhat eth0 is eth0 Link encap:Ethernet HWaddr 00:50:BF:FF:C0:04 inet addr:10.0.0.3 Bcast:10.0.0.15 Mask:255.255.255.240 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:2058 (2.0 Kb) Interrupt:5 Base address:0x9000 My U10 hme0 is hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.0.0.2 netmask ffffff00 broadcast 10.255.255.255 ether 8:0:20:9f:a:55 What I am doing wrong here?, Linksys manual says just to connect your systems to the switch. Please help me!!!! Solution: As suggested by all of you my netmask on Linux was out and also I noticed my U10 was at the OK prompt (when I unplugged the serial cable it dropped to the ok prompt - now I have disabled it). Thanks for the help UnixAdmin __________________________________________________________________ Try AOL and get 1045 hours FREE for 45 days! http://free.aol.com/tryaolfree/index.adp?375380 Get AOL Instant Messenger 5.1 for FREE! Download Now! http://aim.aol.com/aimnew/Aim/register.adp?promos=380455 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Sun Mar 30 22:00:46 2003
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:07 EST