Thanks to everyone who replied. I got a few recommendations: Dan Astoorian, et al.: It's a known problem; the kernel uses an inaccurate value for the clock frequency. Put set sys_tick_freq = 5549020 into /etc/system on the Sun Blade 100's and reboot. ---- This worked great! Lars Hecking suggested installing the latest patch cluster. as well as using Sun's ntpd. We prefer not to do that, since xntpd has some well known security flaws. I tried the latest patch cluster with our version of ntpd, but it didn't fix the problem. What I surmise from this is that the clocks on the Sunblade 100's are not at all accurate on their own. Thanks again to everyone who replied -josh Original post: > > Hi all, > > I'm using ntp 4.1.0 on multiple SunBlade 100s. The SunBlades all > reset their time nearly a second every 10 to 20 minutes, whereas our other > Solaris 8 machines don't. Are there any known issues with either the > internal clock on the SunBlade, or with ntp on the same hardware? A quick > check of sunsolve only turned up references to problems with Sun's xntpd. > > Thanks in advance > > -Josh > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers -- Josh Lothian lothian@cs.utk.edu [demime 0.99c.1 removed an attachment of type application/pgp-signature]Received on Tue Dec 4 21:42:54 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:32:36 EDT