Original question: > I'm trying to be cheap and get a non-Sun monitor for a > Blade 100. It appears to be a standard VGA connector on > the back, but it won't sync with the monitor from my > Ultra 10 and a decent Iiyama has a similar problem. > > Does anyone know if it's possible to check and/or define > graphics specs for CDE from the command line? I'd like > to try fixing this to something that both monitor and > system support before buying a monitor. Which is really two questions, and results in two answers. The command needed to fix video resolution is m64config. I'm glad to say it's not obvious since I'd searched on *vid*, *disp* etc, but found nothing :) afbconfig and fbconfig may also help, but I didn't have to try them to get this working. There's also a site which lists some third party hardware confirmed to work with Sun: http://www.stokely.com/unix.sysadm.resources/faqs3.sun.html Thanks to the following for their answers: Lars Hecking Rainer Heilke Peter Ondruska Hichael Morton Paul Tader Sergio Gelato Fred Hall Geoff Lane Cheers, Stuart.Received on Wed Nov 14 19:07:09 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:32:35 EDT