Summary: Jumpstart E450 problem

From: Stephen Kelly <stephen.kelly_at_eei.ericsson.se>
Date: Tue Jun 18 2002 - 08:56:24 EDT
Thanks to Wade Stuart & Unix Admin (Joe).

Synopsis points that I've either no hope, or else Ram
problem. I tried reseating faulty SIMM's without
success, so I've had to remove a group of four,
and re-jump the machine. Its working fine at the
moment, but I'll have to wait and see how it behaves
underload situations.

Thanks,

/SK


From: UnixAdmin

Hi!

You may have already received a similar response from
the group or found the information on sunsolve.  If
not, take a look on sunsolve at Bug ID 4350537.
Basically, you're hosed.  The contents of the Work
Around section of the report states:
They replaced:

 systemboard
 simms
 cpus

 without any success.

Sometimes the system did boot in a minimal connfig.
Sometimes reseting cpus and simms helps, but there are
still ecc errors.

Good Luck!!

-Joe



Wade Stuart wrote:

>You have a ECC SIMM that is failing,  you should see more lines after that
>error that look like:
>
>                                                                            
> Sep 13 19:56:26 dl012 unix:          AFSR=40640000.1f800000                
> AFAR=00000000.0cb3a940,                                                    
> Sep 13 19:56:26 dl012 unix:          double word offset=0, SIMM 1904 id    
> 31.                                                                        
> Sep 13 19:56:26 dl012 unix: syndrome bits 64                               
>                                                                            
>                                                                            
>
>
>In that case SIMM: 1904 is failing.
>
>Note** e450's have had some errors pointing to the wrong failing SIMM, see
>bug id
>                                                                            
>                                                                            
>                                                                            
>                                                                            
> 4181332                                                                    
>                                                                            
>                                                                            
>
>
>For a location on the memory slot look at
>http://sunsolve.sun.com/handbook_private/Devices/System_Board/SYSBD_E450.html
>
>-Wade
>
>
>
>
><orig>
>
>Hi,
>
>I'm jumpstarting an E450 with Solaris 8 02/02 (I've used the jumpstart
>server
>often before so I'm presuming its not the problem). We've just been
>given the E450
>from another company branch, so I'm unaware of any previous problems.
>
>During the jumpstart, it keeps reproducing the same error
>
>"Warning: correctable error from pci0 (upa mid 1f) during DVMA read
>transaction
>syndrome bits 64"
>
>Anyone have any idea whats causing the problem, and whether it
>requires a solution (the packages seem to be loading ok)
>
>Thanks,
>
>/SK
>
>
>  
>

-- 
Stephen Kelly 
TCM/TEM Group                         Ericsson Systems Expertise Limited
Phone  +353 902 31422                 Cornamaddy
Mobile +353 87 6470477                Athlone 			 
Fax    +353 902 31304                 Co. Westmeath			
email stephen.kelly@eei.ericsson.se   Ireland
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Jun 18 09:01:50 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:47 EST