Thanks to all who responded. Booting from CD in single user mode, uninstalling patch 147440-02 and reinstalling the boot block is what did the trick for me. Loris From: loris.serena@bnymellon.com To: sunmanagers@sunmanagers.org Date: 10/11/2011 10:12 Subject: "Fast Data Access MMU Miss" error on Netra T1 after applying Oct 2011 Sol 10 CPU patchset Sent by: sunmanagers-bounces@sunmanagers.org Hello List, On a Netra T1, I rebooted in single user mode and installed the latest CPU patchet. Following patches were applied : 125555-11 144526-02 146470-04 147434-01 147440-02 142933-04 145899-06 147266-01 147436-01 147713-01 At next reboot, I end up with the following error: ok boot disk Boot device: /pci@1f,0/pci@1,1/scsi@2/disk@0,0 File and args: ufs-file-system Loading: /platform/SUNW,UltraSPARC-IIi-cEngine/boot_archive Loading: /platform/sun4u/boot_archive ramdisk-root ufs-file-system Loading: /platform/SUNW,UltraSPARC-IIi-cEngine/kernel/sparcv9/unix Loading: /platform/sun4u/kernel/sparcv9/unix Fast Data Access MMU Miss ok After a bit of googling, I tried probe-scsi-all and reset-all, to no avail. The devalias for the disk seems correct to me: ok printenv Variable Name Value Default Value tpe-link-test? true true scsi-initiator-id 7 7 keyboard-click? false false keymap watchdog-timeout 65535 65535 watchdog-enable? false false ttyb-rts-dtr-off false false ttyb-ignore-cd true true ttya-rts-dtr-off false false ttya-ignore-cd true true ttyb-mode 9600,8,n,1,- 9600,8,n,1,- ttya-mode 9600,8,n,1,- 9600,8,n,1,- cpci-probe-list 0,1,2,3,4,5,6,7,8,9,a,b, ... 0,1,2,3,4,5,6,7,8,9,a,b, ... pcia-probe-list 1 1 pcib-probe-list 1,2,3 1,2,3 mfg-mode off off diag-level max max d7s-flipped? false false #power-cycles 58 system-board-serial# system-board-date last-poweroff-cause 0 0 env-monitor enabled enabled shutdown-temperature 74 72 warning-temperature 69 67 fcode-debug? false false output-device ttya ttya input-device ttya ttya load-base 16384 16384 auto-boot-retry? false false use-boot-table? false false boot-command boot boot auto-boot? false true watchdog-reboot? false false diag-file diag-device net net boot-file boot-device disk disk1 disk net local-mac-address? true false net-timeout 0 0 ansi-terminal? true true screen-#columns 80 80 screen-#rows 34 34 silent-mode? false false use-nvramrc? true false nvramrc security-mode none security-password security-#badlogins 0 oem-logo oem-logo? false false oem-banner oem-banner? false false hardware-revision last-hardware-update diag-switch? true false ok ok ok devalias cdrom1 /pci@1f,0/pci@1,1/scsi@2/disk@6,0:f cdrom /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f ide-disk /pci@1f,0/pci@1/pci@1/ide@e/disk@0:f ide-cdrom /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f ide /pci@1f,0/pci@1/pci@1/ide@e userprom2 /pci@1f,0/pci@1,1/ebus@1/flashprom@10,800000 userprom1 /pci@1f,0/pci@1,1/ebus@1/flashprom@10,400000 i2c-cs2 /pci@1f,0/pci@1,1/ebus@1/i2c@14,100000 i2c /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000 systemprom /pci@1f,0/pci@1,1/ebus@1/flashprom@10,0 pcic /pci@1f,0/pci@1/pci@1 pcib /pci@1f,0/pci@1,1 pcia /pci@1f,0/pci@1 ebus /pci@1f,0/pci@1,1/ebus@1 net2 /pci@1f,0/pci@1,1/network@3,1 net /pci@1f,0/pci@1,1/network@1,1 floppy /pci@1f,0/pci@1,1/ebus@1/fdthree disk /pci@1f,0/pci@1,1/scsi@2/disk@0,0 cdrom /pci@1f,0/pci@1,1/scsi@2/disk@6,0:f tape /pci@1f,0/pci@1,1/scsi@2/tape@4,0 tape1 /pci@1f,0/pci@1,1/scsi@2/tape@5,0 tape0 /pci@1f,0/pci@1,1/scsi@2/tape@4,0 diskf /pci@1f,0/pci@1,1/scsi@2/disk@f,0 diske /pci@1f,0/pci@1,1/scsi@2/disk@e,0 diskd /pci@1f,0/pci@1,1/scsi@2/disk@d,0 diskc /pci@1f,0/pci@1,1/scsi@2/disk@c,0 diskb /pci@1f,0/pci@1,1/scsi@2/disk@b,0 diska /pci@1f,0/pci@1,1/scsi@2/disk@a,0 disk9 /pci@1f,0/pci@1,1/scsi@2/disk@9,0 disk8 /pci@1f,0/pci@1,1/scsi@2/disk@8,0 disk7 /pci@1f,0/pci@1,1/scsi@2/disk@7,0 disk6 /pci@1f,0/pci@1,1/scsi@2/disk@6,0 disk5 /pci@1f,0/pci@1,1/scsi@2/disk@5,0 disk4 /pci@1f,0/pci@1,1/scsi@2/disk@4,0 disk3 /pci@1f,0/pci@1,1/scsi@2/disk@3,0 disk2 /pci@1f,0/pci@1,1/scsi@2/disk@2,0 disk1 /pci@1f,0/pci@1,1/scsi@2/disk@1,0 disk0 /pci@1f,0/pci@1,1/scsi@2/disk@0,0 scsi /pci@1f,0/pci@1,1/scsi@2 ttyb /pci@1f,0/pci@1,1/ebus@1/su@14,3602f8 ttya /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8 ttyd /pci@1f,0/pci@1,1/ebus@1/se@14,400000:b ttyc /pci@1f,0/pci@1,1/ebus@1/se@14,400000:a ok ok ok probe-scsi-all /pci@1f,0/pci@1,1/scsi@2 Target 0 Unit 0 Disk HITACHI DK32EJ36NSUN36G PQ0B Target 1 Unit 0 Disk HITACHI DK32EJ36NSUN36G PQ0B Enabling diagnostics to max level, here is what I get: LOM event: power on Probing for keyboard entry to skip POST Enter Checking KB ps/2 kbd check: 0000.0000.0000.00fe Checking Sun KB Done %o0 = 0000.0000.0000.4001 Executing Power On SelfTest SPARCengine(tm)Ultra CP 1500 POST 1.16 ME created 01/12/00 Time Stamp [hour:min:sec] 09:58:39 Init POST BSS Init System BSS Probing system keyboard : Done DMMU TLB Tags DMMU TLB Tag Access Test DMMU TLB RAM DMMU TLB RAM Access Test Ecache Tests Probe Ecache ecache_size = 0x00200000 Ecache RAM Addr Test Ecache Tag Addr Test Ecache RAM Test Ecache Tag Test Invalidate Ecache Tags All CPU Basic Tests V9 Instruction Test CPU Tick and Tick Compare Reg Test CPU Soft Trap Test CPU Softint Reg and Int Test All Basic MMU Tests DMMU Primary Context Reg Test DMMU Secondary Context Reg Test DMMU TSB Reg Test DMMU Tag Access Reg Test DMMU VA Watchpoint Reg Test DMMU PA Watchpoint Reg Test IMMU TSB Reg Test IMMU Tag Access Reg Test IMMU TLB RAM Access Test IMMU TLB Tag Access Test All Basic Cache Tests Dcache RAM Test Dcache Tag Test Icache RAM Test Icache Tag Test Icache Next Test Icache Predecode Test UltraSPARC IIi MCU Control & Status Regs Init and Tests Init UltraSPARC IIi MCU Control & Status Regs CPU speed : 440 Mhz, mc1 set : 0x544cb9dd Memory Probe and Init Probe Memory INFO: All the memory Group in 10 bit column mode Group 0: 256MB Group 1: 256MB Group 2: 0MB Group 3: 0MB Malloc Post Memory Init Post Memory .......... Memory Addr w/ Ecache Map PROM/STACK/NVRAM in DMMU Load Post In Memory Run POST from MEM .......... loaded POST in memory Update Master Stack/Frame Pointers All FPU Basic Tests FPU Regs Test FPU State Reg Test FPU Functional Test FPU Trap Test Memory Tests Init Memory ............... ................ ................ ................ Memory Addr w/ Ecache Test ECC Memory Addr Test Block Memory Addr Test Block Memory Test ............... ............... ................ ................ ................ ................ ................ ................ ECC Blk Memory Test ............... ............... ................ ................ ................ ................ ................ ................ All Basic UltraSPARC IIi PBM Tests Init UltraSPARC IIi PBM PIO Decoder and BCT Test PCI Byte Enable Test UltraSPARC IIi IOMMU Regs Test UltraSPARC IIi IOMMU RAM NTA Test UltraSPARC IIi IOMMU CAM NTA Test UltraSPARC IIi IOMMU RAM Address Test UltraSPARC IIi IOMMU CAM Address Test IOMMU TLB Compare Test IOMMU TLB Flush Test PBM Control/Status Reg Test PBM Diag Reg Test UltraSPARC IIi PBM Regs Test All Advanced CPU Tests DMMU Hit/Miss Test DMMU Little Endian Test IU ASI Access Test FPU ASI Access Test Ecache Thrash Test All CPU Error Reporting Tests CPU Addr Align Trap Test DMMU Access Priv Page Test DMMU Write Protected Page Test All Advanced UltraSPARC IIi PBM Tests Init UltraSPARC IIi PBM Consist DMA Wr, IOMMU hit Ebus Test All Basic Cheerio Tests Cheerio Ebus PCI Config Space Test Cheerio Ethernet PCI Config Space Test Cheerio Ebus Engine Reg Test Cheerio Init All Basic I2c Tests Init i2c bus Thermister Reading Test Thermister Position Readings (in Hex) CPU 0x74 All Basic PCI-PCI Bridge Tests PCI-PCI Bridge Config Space Test All Basic Symbios 875 SCSI controller Tests Symbios 875 SCSI controller PCI Config Space Test Power On Selftest Completed Status = 0000.0000.0000.0000 ffff.ffff.f100.1db0 019f.3333.3a50.0011 Software Power ON @(#) SPARCengine(tm)Ultra CP 1500 3.10.25 ME created 2000/01/17 21:26 Enter Checking KB ps/2 kbd check: 0000.0000.0000.00fe Checking Sun KB Clearing E$ Tags Done Clearing I/D TLBs Done Probing Memory Group Info[0000.0000.0000.0003] : 0000.0000.0000.0000 Group Info[0000.0000.0000.0002] : 0000.0000.0000.0000 Group Info[0000.0000.0000.0001] : 0000.0000.0000.0110 Group Info[0000.0000.0000.0000] : 0000.0000.0000.0110 Done Clearing Memory...Done MEM BASE = 0000.0000.2800.0000 MEM SIZE = 0000.0000.0800.0000 MMUs ON Copy Done PC = 0000.01ff.f000.2ffc PC = 0000.0000.0000.3040 Decompressing into Memory Done Size = 0000.0000.0008.6bf0 ttya initialized flashprom flashprom Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 UltraSPARC-IIi Version 9.1 (E$=2 MB) 2-2 module Advanced PCI Bridge Version 1.3 Probing Memory Group #0 128 + 128 : 256 Megabytes Probing Memory Group #1 128 + 128 : 256 Megabytes Probing Memory Group #2 0 + 0 : 0 Megabytes Probing Memory Group #3 0 + 0 : 0 Megabytes Initialise 2nd I2c controller Environmental monitoring: Enabled i2c adc gpio gpio i2c Probing Floppy: No drives detected Probing /pci@1f,0/pci@1,1 at Device 1 network Probing /pci@1f,0/pci@1,1 at Device 2 scsi disk tape Probing /pci@1f,0/pci@1,1 at Device 3 network Probing /pci@1f,0/pci@1 at Device 1 pci Probing /pci@1f,0/pci@1/pci@1 at Device 0 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 1 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 2 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 3 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 4 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 5 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 6 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 7 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 8 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device 9 Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device a Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device b Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device c Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device d Nothing there Probing /pci@1f,0/pci@1/pci@1 at Device e ide disk cdrom Probing /pci@1f,0/pci@1/pci@1 at Device f pci Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 0 pci108e,1000 SUNW,qfe Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 1 pci108e,1000 SUNW,qfe Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 2 pci108e,1000 SUNW,qfe Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 3 pci108e,1000 SUNW,qfe Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 4 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 5 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 6 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 7 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 8 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device 9 Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device a Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device b Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device c Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device d Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device e Nothing there Probing /pci@1f,0/pci@1/pci@1/pci@f at Device f Nothing there Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard OpenBoot 3.10.25 ME, 512 MB memory installed, Serial #16350180. Ethernet address 8:0:20:f9:7b:e4, Host ID: 80f97be4. ok So, what am I missing and how do I get out of here? Any suggestion much appreciated. Regards, Loris Loris Serena ? BNY Mellon Alternative Investment Services Riverside II ? Sir John Rogerson's Quay ? Dublin 2 ? Ireland Tel. +353 1 790 3697 ? Email: loris.serena@bnymellon.com The information contained in this e-mail, and any attachment, is confidential and is intended solely for the use of the intended recipient. Access, copying or re-use of the e-mail or any attachment, or any information contained therein, by any other person is not authorized. If you are not an intended party to this communication, please notify the sender and delete/destroy any and all copies of this communication. Although we attempt to sweep e-mail and attachments for viruses, we do not guarantee that either are virus-free and accept no liability for any damage sustained as a result of viruses. There are some inherent risks with exchanging e-mails. You understand and agree that we are not, and will not be, responsible for the unauthorized access, interception, or redirection of e-mails including any attachments, nor will we be responsible for the effect on any computer system of any e-mails or attachments. You also agree that we will not be responsible for the incorrect or incomplete transmission of information by e-mail The information contained in this communication is not intended or construed as an offer, solicitation, or a recommendation to purchase any security. Opinions, suggestions or views presented in this communication are not necessarily those of The Bank of New York Mellon Corporation or any of its affiliates. Please refer to http://disclaimer.bnymellon.com/eu.htm for disclosures relating to European legal entities _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers The information contained in this e-mail, and any attachment, is confidential and is intended solely for the use of the intended recipient. Access, copying or re-use of the e-mail or any attachment, or any information contained therein, by any other person is not authorized. If you are not the intended recipient please return the e-mail to the sender and delete it from your computer. Although we attempt to sweep e-mail and attachments for viruses, we do not guarantee that either are virus-free and accept no liability for any damage sustained as a result of viruses. Please refer to http://disclaimer.bnymellon.com/eu.htm for certain disclosures relating to European legal entities. The information contained in this e-mail, and any attachment, is confidential and is intended solely for the use of the intended recipient. Access, copying or re-use of the e-mail or any attachment, or any information contained therein, by any other person is not authorized. If you are not an intended party to this communication, please notify the sender and delete/destroy any and all copies of this communication. Although we attempt to sweep e-mail and attachments for viruses, we do not guarantee that either are virus-free and accept no liability for any damage sustained as a result of viruses. There are some inherent risks with exchanging e-mails. You understand and agree that we are not, and will not be, responsible for the unauthorized access, interception, or redirection of e-mails including any attachments, nor will we be responsible for the effect on any computer system of any e-mails or attachments. You also agree that we will not be responsible for the incorrect or incomplete transmission of information by e-mail The information contained in this communication is not intended or construed as an offer, solicitation, or a recommendation to purchase any security. Opinions, suggestions or views presented in this communication are not necessarily those of The Bank of New York Mellon Corporation or any of its affiliates. Please refer to http://disclaimer.bnymellon.com/eu.htm for disclosures relating to European legal entities _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Nov 11 10:36:15 2011
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:18 EST