Hello: When building the box from a flar archivefile, the client boot disk is different than the one on flar archive. It makes the build like a cloniing. I need to build a new /dev, /devices, and /etc/path_to_inst. ok> boot net -s # mount /dev/dsk/c0t2d0s0 /a # cd /tmp/dev # tar cvfp - . | (cd /a/dev; tar xvfp -) ... # cd /tmp/devices # tar cvfp - . | cd /a/devices; tar xvfp -) ... # cp /tmp/root/etc/path_to_inst /a/etc/path_to_inst ok> boot disk2 -r Thanks. Warren Original posting: After build a X1 box by flash archive file, boot fails: ok> boot disk2 ... mount: /dev/dsk/c0t2d0s3 or /usr, no such file or directory /sbin/rcS: /usr/bin/loadkeys: not found WARNING: /proc could not be mounted /sbin/swapadd: expr: not found WARNING - /usr/sbin/fsck not found. Most likely the mount of /usr failed or the /usr filesystem is badly damaged. The system is being halted. Either reinstall the system or boot with the -b option in an attempt to recover. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Jan 9 14:37:33 2009
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:13 EST