On Wed, Dec 13, 2006 at 10:23:39AM +0100, Grzegorz Bakalarski wrote: > sccli> show enclosure-status > Ch Id Chassis Vendor Product ID Rev Package Status > ----------------------------------------------------------------- > 0 14 005C0A SUN StorEdge 3310 A A000 A000 Fault > > Enclosure Component Status: > Type Unit Status FRU P/N FRU S/N Add'l Data > ------------------------------------------------------------------ > Fan 0 OK 370-5398 108198 -- > Fan 1 OK 370-5398 108228 -- > PS 0 OK 370-5398 108198 -- > PS 1 OK 370-5398 108228 -- > Temp 0 OK 370-5524 005C0A temp=22 > Temp 1 OK 370-5524 005C0A temp=22 > Temp 2 OK 370-5398 108198 temp=22 > Temp 3 OK 370-5394 026348 temp=30 > Temp 4 OK 370-5394 026023 temp=23 > Temp 5 OK 370-5524 005C0A temp=22 > Temp 6 OK 370-5398 108228 temp=23 > EMU 0 Unknown 370-5394 026348 > EMU 1 Unknown 370-5394 026023 > DiskSlot 0 Absent 370-5524 005C0A addr=0,led=off > DiskSlot 1 Absent 370-5524 005C0A addr=1,led=off > DiskSlot 2 Absent 370-5524 005C0A addr=2,led=off > DiskSlot 3 Absent 370-5524 005C0A addr=3,led=off > DiskSlot 4 Absent 370-5524 005C0A addr=4,led=off > DiskSlot 5 Absent 370-5524 005C0A addr=5,led=off > DiskSlot 6 OK 370-5524 005C0A addr=0,led=off > DiskSlot 7 OK 370-5524 005C0A addr=1,led=off > DiskSlot 8 OK 370-5524 005C0A addr=2,led=off > DiskSlot 9 OK 370-5524 005C0A addr=3,led=off > DiskSlot 10 OK 370-5524 005C0A addr=4,led=off > DiskSlot 11 OK 370-5524 005C0A addr=5,led=off > > > Enclosure SCSI Channel Type: single-bus > sccli> > Hi, Nobody responded yet. However I have some better result now. I'v upgreaded saf-te firmware from factory default (A00000) to rev 1170 (patch 113722-09) and now I get the following: sccli> show enclosure-status Ch Id Chassis Vendor Product ID Rev Package Status ----------------------------------------------------------------- 0 14 005C0A SUN StorEdge 3310 A 1170 1170 OK Enclosure Component Status: Type Unit Status FRU P/N FRU S/N Add'l Data ------------------------------------------------------------------ Fan 0 OK 370-5398 108198 -- Fan 1 OK 370-5398 108228 -- PS 0 OK 370-5398 108198 -- PS 1 OK 370-5398 108228 -- Temp 0 OK 370-5524 005C0A temp=21 Temp 1 OK 370-5524 005C0A temp=21 Temp 2 OK 370-5398 108198 temp=22 Temp 3 OK 370-5394 026348 temp=27 Temp 4 OK 370-5394 026023 temp=22 Temp 5 OK 370-5524 005C0A temp=22 Temp 6 OK 370-5398 108228 temp=23 EMU 0 OK 370-5394 026348 EMU 1 OK 370-5394 026023 DiskSlot 0 Unknown 370-5524 005C0A addr=0,led=off DiskSlot 1 Unknown 370-5524 005C0A addr=1,led=off DiskSlot 2 Unknown 370-5524 005C0A addr=2,led=off DiskSlot 3 Unknown 370-5524 005C0A addr=3,led=off DiskSlot 4 Unknown 370-5524 005C0A addr=4,led=off DiskSlot 5 Unknown 370-5524 005C0A addr=5,led=off DiskSlot 6 OK 370-5524 005C0A addr=0,led=off DiskSlot 7 OK 370-5524 005C0A addr=1,led=off DiskSlot 8 OK 370-5524 005C0A addr=2,led=off DiskSlot 9 OK 370-5524 005C0A addr=3,led=off DiskSlot 10 OK 370-5524 005C0A addr=4,led=off DiskSlot 11 OK 370-5524 005C0A addr=5,led=off Enclosure SCSI Channel Type: split-bus sccli> Note: EMU 0 and EMU 1 have OK status. And also SCSI Channel Type is correct i.e. split-bus. The only concern is now why disks in slots [0-5] are Unknown ???? Kind regards, Gb _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Dec 13 07:07:20 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:03 EST