If you want to see the right condition of the FC controllers and disks, issue the `cfgadm -al' command as root !!! Vladimir On Thu, 10 Aug 2006 19:06:52 +0300 Vladimir Terziev <vlady@gbservices.biz> wrote: > Hi Managers, > > i have Sun StorEdge 3510 (SE 3510) disk array which i have connected to a Sun V880 server. > > The V880 has 3 FC disk controllers -- one managing the internal disks and 2 managing two different external storage arrays - one T3B array and the recently installed SE 3510 array. > > After power-up of the 3510 array i saw very stange information regarding FC controllers and disks. `cfgadm -al' shows all FC controllers in condition "failed" and all disks connected to the controllers in condition "failing". > Despite this, it seems the V880 machine continue to work properly. > > Could someone point me to some explanation/solution regarding the problem ? > > Do i have to issue `cfgadm -t' or reconfiguration reboot in order to move the disks and controllers in "ok" condition ? > > Thanks in advance! > > Vladimir > _______________________________________________ > sunmanagers mailing list > sunmanagers@sunmanagers.org > http://www.sunmanagers.org/mailman/listinfo/sunmanagers _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Thu Aug 10 12:28:34 2006
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:00 EST