Summary: Unix (Sun's) commands needed to manage Sun's storage arrays

From: Tony Magtalas <ttk67_at_yahoo.com>
Date: Thu Aug 25 2005 - 19:10:01 EDT
Many thanks to 
"Trinh, Linh T. [C]" <Linh.T.Trinh@nga.mil>
"Darren Dunham" <ddunham@taos.com>
"Coy Hile" <coy.hile@coyhile.ca>
"Daniel Nuno" <daniel.nuno@gmail.com> 
"Rami Aubourg-Kaires" <rami.aubourg@ifrance.com>
"Solaris List" <solarislist@gmail.com>

Original question:
I just inherited a bunch of A1000, D1000, D5200
arrays,
connected to Sun's 4500,6500, E420 etc..
Some are standalone, some Veritas Vxvm/VCS controlled.
Does anybody have a cheatsheet with Sun commands to
manage these storage arrays?

Darren Dunham from TAOS.COM summed it best:

A1000/A3500 have on-board RAID controllers.  You need
to grab Raid manager 6.22.1 from Sun (and not be
running Solaris 10) to manage them.

'rm6' is the GUI tool that's generally used.

D1000 is JBOD scsi.  No real commands here.

A5x00 are JBOD fiber.  The only commands you might
need here would be 'luxadm' to aid online/offline and
discovery of individual drives.  You might also need
'cfgadm' to configure controllers or targets up and
down.

-- 
Darren Dunham                                         
 
ddunham@taos.com
Senior Technical Consultant         TAOS            
http://www.taos.com/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Aug 25 19:10:26 2005

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:51 EST