SUMMARY : problem two lun in Disk array

From: jimi beyylorn <>
Date: Mon Oct 07 2002 - 07:25:38 EDT

First of all thank you for the quick overwhelming responses 

"Donaldson, Mark" <

"John Kingsland" <> 

soulation is :

i must modify the /kernel/drv/sd.conf file.  By default Solaris 
creates one LUN per target.

Of course always save a copy of the original file.

For the appropriate target change this

name="sd" class="scsi"
        target=4 lun=0;

To this

name="sd" class="scsi"
        target=4 lun=0;
name="sd" class="scsi"
        target=4 lun=1;
name="sd" class="scsi"
        target=4 lun=2;

Then boot -r the server.  The device files for the additional LUNs 
should be


-----Original Message----- 
From: jimi beyylorn [] 
Sent: Wednesday, October 02, 2002 3:12 AM 
Subject: problem two lun in Disk array 


 I connected Disk Array Runtop 6180 with 8 hard disk By HostA to Axus (SunBlade1000) ,I Configure In Target 3 Two Raid 5 that every Raid contain 4 hard disk ,that One Raid in Lun0,Other Raid in Lun1 .

 When I used probe-scsi-all command in OK mode , System detected Disk Array in Target 3 with Two LUN. But when boot Solaris By boot -r command ,used format command display Only Lun0 in c2t3d0 ,not Display Lun1 .

Please help me 
Faith Hill - Exclusive Performances, Videos, & more
sunmanagers mailing list
Received on Mon Oct 7 07:28:30 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:55 EST