SUMMARY: DiskSuite 4.2.1 with non-Sun drives

From: Steve Sandau <ssandau_at_bath.tmac.com>
Date: Wed Aug 28 2002 - 19:28:25 EDT
You know, I have messed with this problem and searched for answers to it
for months. Less than 24 hours after posting my query to this list I
have at least one answer that works! You folks are great!

Thanks to Bertrand_Hutin, Mika Tuupola, and another anonymous
respondent.

Original post:
--------------
Hi, folks,

I have a problem with DiskSuite 4.2.1 on Solaris 8 complaining that
slices on different disks are overlapping slices, when of course they
are not. I believe that this problem is due to non-Sun disk drives
without unique serial numbers on the drive. I found some info on the
internet that indicated that DiskSuite 4.2 does not have this problem.

Questions: Anyone know if (where) it is possible to obtain DS 4.2? Is it
possible to give the drives unique "serial" numbers as if they were Sun
drives? Any other ideas?

Will summarize of course.
--------------

My solution was to add an entry to /kernel/drv/sd.conf to tell DiskSuite
that the drive serial numbers for that drive model are bogus. Works for
me. The two other solutions were a copy of DS 4.2 (is reputed to work,
but I don't know) and a program called rwdevid which didn't work for me.
A couple of things I read suggested that it might not work with Solaris
8. Again, I don't know if that works in other situations either.

In any case, thanks, guys!

-- 
Steve Sandau
IS Technician
TMA Bath, Maine
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Aug 28 19:31:54 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:54 EST