SUMMARY: SS10 and Null Modem Cable Problem

From: Konstantin Rozinov (ukon@speakeasy.org)
Date: Mon Oct 30 2000 - 22:07:50 CST


Sun-Managers,

###############
# THANK YOUs
###############

Thank you all for the replys. I would like to thank the following (in
no particular order):
Mike Salehi, Craig Whytock, Scott Kulp, JCJ6, Nabeel Ahmed, Sinha
Deepak, Dan Liebster, David Alford, David Evans, Douglas Lee, Darren
Dunham, Barry Gamblin, Buddy Lumpkin, Mark Luntzel, Steve Hastings, and
anyone else I missed....

############
# SOLUTION
############

Summary of most respones,

Apparently, my settings seem to be right. Although I tried almost all
the possible combination of different settings (baud rate, parity, flow
control, etc....), nothing seems to work. I will have to bring this
sucka to work and attach a sun monitor to it to check it out. As far as

the cable being null cable, it is because I checked it with an eletrical

meter and pins 2 and 3 are reversed, as they should be.
It is probably something to do with the fact that the serial port on the

SS10 is labeled A/B (there is only one physical DB-25 connector labeled
A/B). I will have to see that the output is actually going out to
ttya. I will update later.

Thanks!

#####################
# ORIGINAL MESSAGE:
#####################

Hi!

I am new to the sun world, and thus I got myself a used ss10. I have no

monitor for it, nor a keyboard or a mouse. I am trying to connect my nt

box to it through a null modem cable. I plug the 25-pin end into the
ss10, and the db-9 end into the nt box, on COM1. Then I use SecureCRT
to connect to COM1 (I also tried Hyperterminal). The following are the
settings for COM1:

Baud: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: RTS/CTS (default value)

When I try to connect, it seems to connect but doesn't display anything
in the window. I have tried different combinations of those paramaters,

but obviously I have not gotten it yet. Would anyone please assist me
in this (probably) simple problem. I would greatly appreciate it. And
of course I will summarize, with the Original Question!

What am I doing wrong?

--Konstantin

S
U BEFORE POSTING please READ the FAQ located at
N ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/faq
. and the list POLICY statement located at
M ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/policy
A To submit questions/summaries to this list send your email message
to:
N sun-managers@sunmanagers.ececs.uc.edu
A To unsubscribe from this list please send an email message to:
G majordomo@sunmanagers.ececs.uc.edu
E and in the BODY type:
R unsubscribe sun-managers
S Or
. unsubscribe sun-managers original@subscription.address
L To view an archive of this list please visit:
I http://www.latech.edu/sunman.html
S
T

S
U BEFORE POSTING please READ the FAQ located at
N ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/faq
. and the list POLICY statement located at
M ftp://ftp.cs.toronto.edu/pub/jdd/sun-managers/policy
A To submit questions/summaries to this list send your email message to:
N sun-managers@sunmanagers.ececs.uc.edu
A To unsubscribe from this list please send an email message to:
G majordomo@sunmanagers.ececs.uc.edu
E and in the BODY type:
R unsubscribe sun-managers
S Or
. unsubscribe sun-managers original@subscription.address
L To view an archive of this list please visit:
I http://www.latech.edu/sunman.html
S
T



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:20 CDT