Thank's to
Mark Olson <olsonm@my-deja.com>
Riccardo Veraldi <Riccardo.Veraldi@bo.infn.it>
"David L. Markowitz" <David.Markowitz@litronic.com>
I found the solution last night by using and old Pentium 100 that used
to run Solaris 2.6 and 7 on IDE.
The problem is solve by doing this:
On the AHA-2940AU, there is an config utility. By going in the config
utility, go in
"Advanced Configuration Options" and then the option "BIOS Support for
INT13 Extension" is "enabled" by default. I've disabled that option and
it's working !!!
I've also upgraded my ASUS P2B-F BIOS version to the latest version 1012
(03/03/2000) but I don't really know if this is part of the solution or
not.
Thank's.
Simon-Bernard Drolet wrote:
>
> Hi Sunners,
>
> I've got a Pentium back home that is currently running Solaris 7 and
> WinNT 4. The PC
> is a clown with an ASUS P2B-F motherboard, Celeron 400MHz, 128Mb and my
> SCSI HBA is
> an Adaptec AHA-2940AU with two Seagate SCSI connected to it (ST34573N
> and ST34520N).
>
> I'm trying to install Solaris 8 on one SCSI disk and booting from an IDE
> CDROM to install works fine. When the system reboots to finish up the
> install, the
> boot prom panic with this message:
>
> SunOS Secondary Boot version 3.00
>
> <bootdev>:a: cannot open - no media in drive
> prom_panic: Could not mount filesystem.
>
>
> My question: Is anyone running Solaris 8 x86 using an AHA-2940AU as the
> boot controller ?
>
> I'm guessing there is a bug with S8 because this works great with S7 !
>
> Simon.
> --
> Simon-Bernard Drolet mailto:Simon-Bernard.Drolet@M3iSystems.com
> Unix (Sun/Hp) System Admin, SCSA for Solaris 7,
> SCTI (EU-118, SA-237, SA-287, SA-387), ECC in Sun'Competency 2000
> program
-- Simon-Bernard Drolet mailto:Simon-Bernard.Drolet@M3iSystems.com Unix (Sun/Hp) System Admin, SCSA for Solaris 7, SCTI (EU-118, SA-237, SA-287, SA-387), ECC in Sun'Competency 2000 program
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:14:08 CDT