QUESTION:
If I take a mistake in writing in OBP
setenv output-device smth_bad
setenv input-device smth_bad
Any input or output then failed.
What can I do then ?
(reset smth physically? or somehow else?)
Thanks to:
"Marco Greene" <mgreene@sympatico.ca>
"Balfour, Scott (Eurosoft)" <scott.balfour-eds@eds.com>
"Kronitz, Ira" <irak@bscg.com>
robsonk@ebrd.com
"Salehi, Michael E" <Mike.Salehi@usa.xerox.com>
owner-sun-managers@sunmanagers.ececs.uc.edu
Anthony Worrall <Anthony.Worrall@reading.ac.uk>
Adrian Stovall <adrians@solarsystems.com>
David Robillard <David.Robillard@Matrox.COM>
domahony@csc.com
ANSWER:
with a keyboard attatched, try typing [STOP]+N right after you turn the
machine on. I'm not sure it will work if you changed the "input device"
environment variable, but this command tells the machine to set defaults,
and if it will accept keyboard input, it should fix the problem.
That was mentioned in solaris answerbook too.
Thanks.
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:26 CDT