Addendum: Summary: GX Graphics Mystery

From: Michael J. Connolly (mjconnly@newton41.ckcorp.com)
Date: Mon Mar 29 1999 - 10:22:36 CST


Greetings,

The replacement card (see Update: GX Graphics Mystery) lasted about 4 hours
(just enough time for me to get the OS and patches installed) and then
the symptoms re-appeared. I am beginning to think that it is an SBUS issue
on the Ultra 2. I pulled the GX card and put it back in the Sparc 10 that
I took it from and it works fine. I'll end this thread but if I find anything
concrete I WILL post a final solution.

Previous summary:
First, let me apologize for leaving out an important detail: the machine
is (was) running Solaris 2.5.1.
Solutions offered:

Check power management. - As stated in"Update" power mgt. was not installed
or configured.

Go to Radio Shack and get component cooler spray (there's a hop in the
way back machine). Yes, tried it and problem still occurred.

Use Sun VTS do diagnose the problem. Unfortunately I did not have the time
as I was backing up the machine in preparation for an OS (2.6) and application
install.

Solution: I took a GX board out of another machine last night and installed
it before I left work with xlock running. Came in this morning and xlock
(and monitor) still running fine.

Thanks to:

Peter Laws
James Coby
David Evans
Richard Smith
Casper Dik

Original problem:

I put a GX graphics card in an Ultra Enterprise 2. It seemed to work for
a while (months) and then the monitor started to flicker. I changed the
monitor and all seemed well for about a week. Now, after a reboot the monitor
is fine for about 30 minutes and then goes blank with the monitor light
blinking indicating there is no signal to the monitor. If I do another
reboot I get the same results - monitor works for about 30 minutes. SO,
is it the GX card or the motherboard and how can I test it without grabbing
another GX card from another box? This is somewhat urgent as I plan to
install Solaris 2.6 and a whole bunch of apps this weekend and would prefer
to work with a monitor attached. TIA

Regards,
Michael J. Connolly
CAD System Administrator
C&K Components, Inc.
Watertown, MA/Clayton, NC
617-926-6400 x8302
617-926-6245 (FAX)
mjconnly@ckcorp.com
"Our OS which art in CPU-UNIX be thy name."



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:13:17 CDT