SUMMARY: Can not add replicas

From: Ginny Bolyard (vbolyard@lucent.com)
Date: Fri May 01 1998 - 07:20:46 CDT


The problem was that the SSA drivers were not loading before ODS began. I
placed the entries in the systems file before the forceload of the MDD root
and database.

I would like to thank the following folks for their help!

Chris Alexander
Alex Goodson
Rogerio Rocha

Ginny Bolyard
IBM GS Middletown
(732) 957-3010
vbolard@lucent.com

************************************
Original Posting ...

I currently have an Ultra II running 2.5.1, with ODS 4.0. I have a multipack
attached to it, with replicas on 3 of the 4 disks. I just recently added
a sparc storage array model 100. Everytime I try to add replicas on a disk
within the array, they come up in "unkown state", after a reboot. This
happens on both raw, and FS partitons.

When I add the replica, it shows up with the flag "u" - meaning replica
is up to date. After the reboot, it shows up as followed:

#M p unknown unknown /dev/dsk/c2t5d1s0
#M p unknown unknown /dev/dsk/c2t5d10s0

Any help/suggestions, would be appreciated.

Thanks

Ginny Bolyard
IBM GS Middletown
vbolyard@lucent.com
(732)957-3010



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:39 CDT