Thanks to all who responded to my disk problem:
> I have problems running two Seagate ST19171W 9,1 GB Wide SCSI disks in a
> Digital Storage Works pedestal. The drives are connected to a SUN Ultra
> Enterprise Server via an 80 cm Wide SCSI cable -- Thus total cable length
...
> 1 22:29:44 monalisa unix: WARNING: /sbus@1f,0/QLGC,isp@2,10000/sd@4,0 (sd26):
> Feb 1 22:29:44 monalisa unix: disk not responding to selection
> Feb 1 22:29:44 monalisa unix: WARNING: /sbus@1f,0/QLGC,isp@2,10000/sd@4,0 (sd26):
...
etc.
Thanks to
David Wolfskill <david@xtend.net>
KELEMEN Peter <fuji@chiara.csoma.elte.hu>
Joel Lee <jlee@thomas.com>
Dan Pritts <danno@ans.net>
"Mike Zeleznik"<Mike_Zeleznik@mw.3com.com>
I received some reports about similar problems - some of them still unresolved
and some hints where to take care for (termination, firmware version, ....
Fortunately, I can get rid of the problem for the next few days. The vendor
who sold us the drives and Storage Works will take the entire disk tower in
its test/support and check it -- they are also manufacturers of Sparc
Clones have equipment, test tools an qualified people. Thus I can wait what
they will find. Now I hope they are successful analysts and that I get back
a working disk tower - plug-in and use it ----
They asked to give them all the information about the problem. This way I will
forward your hints to them.
Thank You,
Werner Frank
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:12:30 CDT