Many thanks to Casper Dik for the very quick and correct response!
My post and Caspers' reply:
>>Greetings,
>>
>>I have upgraded to Solaris 2.4 and now can not read any tapes created
>>under 2.3. I am using an HP 35480A 4mm DAT drive and am receive
>>the following error when accessing the tape:
>>
>># tar -tf /dev/rmt/0
>>WARNING: /sbus@1,f8000000/esp@0,800000/st@5,0 (st5):
>> Error for command 'read' Error Level: Fatal
>> Requested Block 0, Error Block: 0
>> Sense Key: No Additional Sense
>> Incorrect Length Indicator Set tar: tape read error
>>#
>>
>>I have modified the st.conf to include:
>>
>> tape-config-list=
>> "HP HP35480A", "HP 35480A DAT","hp35480a-data";
>> hp35480a-data = 1,0x34,1024,0x1E39,1,0,0;
>>
>
>Try using "0" for the block size:
>
>(Or try patch 102329-03)
The block size of 0 fixed the problem.
;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-)
;-) Thanks to the all that responsed:
;-) Casper Dik
;-) Brion Leary
;-) Eirh-Yu Hsie
;-) Robert Gillespie
;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-) ;-)
*******************************************************************
* Scott W. Nelson Voice: 317.632.9245 *
* Results Through Technology, Inc Fax: 317.632.9250 *
* 603 East Michigan St email: snelson@rtt.in.net *
* Indianapolis, IN 46202 compuserve: 71640,2446 *
*******************************************************************
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:11:10 CDT