Thanks again for all that replied:
Fedor Gnuchev <qwe@ht.eimb.rssi.ru>
Andrew Lamb <andrew@mis.mua.go.th>
Glenn.Satchell@uniq.com.au
David Procter <daveyp@dcd.pcd.sony.co.uk>
They all say to use one of this command to change the speed of the serial
port:
/usr/sbin/lpadmin
look at /etc/ttydefs and /etc/saf/zsmon/_pmtab
edit /etc/lp/interfaces/printername (change 9600 to 38400)
/usr/bin/admintool
I tried all of them, however, the message still shows up on the console:
zs0:ring buffer overflow
Any other suggestions??? Thanks in advance...
===================================================================
Pablo Ruiz E-mail: ruiz@csee.usf.edu
University of South Florida Phone: (813) 974-3307
CS Dept. Tech Support Fax: (813) 974-5456
===================================================================
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:58 CDT