SUMMARY: IPC not functioning.. again.

From: Susan Thielen (thielen@irus.rri.uwo.ca)
Date: Fri Feb 24 1995 - 00:25:40 CST


Well... I just replaced the internal disk, and now the
IPC is up and running fine.

Another question though...

DOes anyone out there know of a company that buys old
disks and boards for these things?? I'm starting to
get a stockpile of broken disks and bad CPU boards
and whatnots.. I'm sure there must be some companys
out there that re-vamp them??

Anyway.. thanks to
Heas <heas@maelstrom.Timeplex.COM>
steve@pnw.opensys.com (Steve Lee)

Original Question

> I have a Sun IPC that was behaving rather oddly over the summer.
> It would sort of freeze at times.. On reboot it appeared to
> come up OK. Then, one day I couldn't even get the monitor to
> glow.. I changed the framebuffer, to no avail, then I changed
> the CPU board. It worked just dandy.. Until today. It seems
> to have frozen again, and now the little beast won't even boot
> up.
>
> It sits at the line
>
> Boot device:/sbus/esp@0,800000/sd@3,0
>
> I used the diag feature to check out the internal disk, and it
> looks just fine..
>
> Any Ideas as to just what may be happening??
 
Susan KJ Thielen Application Programmer, System Manager
Imaging Lab, Robarts Research Institute Phone: (519) 663-3833
PO Box 5015, 100 Perth Drive Fax: (519) 663-3900
London, ON N6A 5K8 Canada E-mail: thielen@irus.rri.uwo.ca



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:17 CDT