SUMMARY: Adding HP LJ2 to SS20/Solaris 2.3 at 19.2K serial

From: 0000-Admin0000 (root@PICARD.TAMU.EDU)
Date: Tue Oct 11 1994 - 08:58:45 CDT

many thanks to all who responded concerning my problem on setting up a
LaserJet II on a 19.6K serial connection off of a Sparc 20 running
Solaris 2.3. The crux of the problem was that the printer setup on
"admintool" defaults to a 9.6K connection and gives no obvious way of
changing it to 19.2K.

Here is the solution:

  After setting up the printer using admintool the following
  command will change the default 9.6K serial connection to 19.2K:

     lpadmin -p printer_name -o "stty=19200"

  see 'man lpadmin' for more info.

An alternate solution is to edit the interface file directly
which is located in /etc/lp/interfaces/<printer_name> and change
the "stty 9600" to "stty 19200" (I did not try this!).

    - Henrik

This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:11 CDT