SUMMARY : 3rd FSBE card in SS10

From: Swee-Chuan Khoo (
Date: Tue Jul 12 1994 - 01:56:20 CDT

The original problem, I install a 3rd fsbe card in a ss10 and caused the
existing harddisk pack ( 4x1GB ) connected to the 2nd fsbe to become a
(2x2GB) diskpack.
Well, all my fault, first stupid thing I did was to remove the diskpack
from the box without looking at the box and assumed the disk pack is
a 4x1GB diskpack where it actually is a 2x2GB.
Mark from SUN hit the jackpot and solve my problem.

It really benefit me a lot by subscribing to this list.

Mark Davis:
If format thinks there are 2x2.1GB drives, then I'd be willing to bet that
that's what you really have! Open up the Multi-Disk Packs and see how
many disks are in them -- that's the best way to tell for sure.
When you plug in the new FSBE, the esp's may be getting renumbered.
That may be tripping you up.

Thanx for your help too. (Michael Nappi) (Birger A. Wathne) (Zina Yung)

This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:09:05 CDT