>I start getting the console message :
>WARNING: processor level 3 iobus interrupt not serviced
>Also from this point onwards eject tells me :
>No such volume (or no media in specified device): cdrom
>Data CDs are not recognised either. This problem requires a reboot
>to fix it.
>The CDrom is at the end of the daisy chain, there is a QIC-150
>tape drive before it and the chain is not terminated.
I received a number of replies and me-toos.
hedstrom@a34-temp2 suggested stopping and restarting vold and/or WorkMan
from time to time. I did. I couldn't see any reduction in the incidence
of the problem.
Peter.Samuel@nms.otc.com.au has seen this message when he has physically
removed the CDrom drive from the daisy chain (not relevant to my problem).
My SCSI chain was not terminated, email@example.com suggested that a
proper terminator might help so I added one and lo and behold - it didn't.
firstname.lastname@example.org suggested power cycling the CDrom. I did and it worked.
However I still don't know why the problem occurs anyone got any ideas?
________ ___________________________________ /\ | ______| /\ | | / \ | | / \ | Ron Dewey | / /\ \ | |______ / /\ \ | Email : email@example.com | / /__\ \ | ______| / /__\ \ | Phone : (44) 235 432102 | / ______ \ | | / ______ \ | Fax : (44) 235 432375 | / / \ \ | |______/ / \ \ |___________________________________|/_/ \_\|_________/ \_\ T E C H N O L O G Y
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:08:55 CDT