Summary Sun Fire T2000 Half Duplex

From: John Smith <lakhilove_at_gmail.com>
Date: Wed Jun 10 2009 - 04:28:01 EDT
Thanks for all repl.

Changed in /kernel/drv/e1000g.conf
ForceSpeedDuplex=7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7; to


ForceSpeedDuplex=4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4;
 and reboot system and comes out  full duplex  100 mb

Regards

John

From
On Mon, Jun 8, 2009 at 11:01 PM, John Smith <lakhilove@gmail.com> wrote:

> Hi Guys,
>
> I have two T2000 on different switches, one of them is running half duplex
> and other full duplex, they have same Solaris 10 and same
> /kernel/drv/e1000.conf file, output is
>
> # dladm show-dev
>
> e1000g0         link: up        speed: 100   Mbps       duplex: full
>
> on other
>
> e1000g0         link: up        speed: 100   Mbps       duplex: half
>
> conf file is auto negotiate ? Half duplex server is connected to Netgear
> Switch ( I couldn't find any button for half/full only one button upload)
> and other is connected to Cisco Switches ?
>
> Any idea will be appreciated
>
>
> Regards
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Jun 10 04:28:35 2009

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:14 EST