Hello Guys, I have a solaris10 machine that has the following routing table: Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 192.168.10.0 192.168.10.10 U 1 63 dmfe0:1 10.10.10.0 10.10.10.10 U 1 42 dmfe0 default 192.168.10.1 UG 1 2 127.0.0.1 127.0.0.1 UH 1 150 lo0 I dont have problems accessing both 10.10.10.10 and 192.168.10.10 using 192.168.10.1 as default router. However if I switch the default route to 10.10.10.1, only 10.10.10.10 IP is accessible. Both network sits on the same switch. Is there anyway i can have solaris use either of the 2 gws but still have both IPs accessible. Thanks. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Wed Mar 7 05:16:07 2007
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:05 EST