[SUMMARY] Can I configure IPMP with ce1 and ge0 ?

From: SangIn Park <psisunm_at_gmail.com>
Date: Sun Jun 18 2006 - 20:47:24 EDT
Sorry, SUMMARY too late..,

Thanks all reply. Yes, I can configure IPMP with mix devices. hme, qfe,
ce, ge, and so on.

# Original Answer
Hi, Gurus.,

I'll try to configure IPMP with ce1(copper) and ge0(fc). The documents
of SUN are not seeing about interfaces. But, Sun recommended IPMP use a
same type, and they say IPMP is not configuring a same type, example,
Ethernet and ATM, etc. refer to

    "Physical interfaces in the same IPMP group must be of the same
    type. For example, you cannot have an Ethernet interface and an
    Asynchronous Transfer Mode (ATM) interface in the same group"

Have you reference to configure IPMP with ce(cooper) and ge(fc)? Can I
configure IPMP with ce1 and ge0?

sunmanagers mailing list
Received on Sun Jun 18 20:47:55 2006

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:58 EST