SUMMARY: Add SAN disk without Reboot on non-Sun branded controllers

From: Beck, Joseph <jbeck_at_seic.com>
Date: Fri Jun 09 2006 - 15:27:11 EDT
I had various responses and the overriding theme was not many successful
experiences with being able to do this using non-sun branded cards.

I'm using Emulex HBAs and HBAnywhere...on newest 2900 boxes I'm able to
see newly added SAN disks without reboot.

However, on the 490 system in question, I have not been able to get it
to work. Not sure at this point if I need to update the driver or
what...



Joe Beck Ciber Inc. - a consultant to SEI  One Freedom Valley Drive |
Oaks, PA 19456 | p: 610.676.2258 | jbeck@seic.com

________________________________

size=2 width="100%" align=center tabindex=-1>

From: Beck, Joseph
Sent: Monday, June 05, 2006 11:17 AM
To: 'sunmanagers@sunmanagers.org'
Subject: Add SAN disk without Reboot on non-Sun branded controllers



I've used these steps in the past:

devfsadm -C

cfgadm -al     (to get a list of controllers)

cfgadm -c configure c2::500610003412EAB23141

cfgadm -c configure c4::500610003412EAB23142



and on occasion, forget why, had to do a luxadm -e forcelip <port>



However, I'm on a project now where standard is to use Emulex cards and
drivers...and these steps are not working.

After devfsadm -C

And doing the cfgadm not seeing anything, format also doesn't show the
LUN added to the fabric:



(418) >> cfgadm -al

Ap_Id                          Type         Receptacle   Occupant
Condition

c0                             scsi-bus     connected    configured
unknown

c0::dsk/c0t0d0                 CD-ROM       connected    configured
unknown

usb0/1                         unknown      empty        unconfigured ok

usb0/2                         unknown      empty        unconfigured ok

usb0/3                         unknown      empty        unconfigured ok

usb0/4                         unknown      empty        unconfigured ok



Luxadm probe doesn't even see hba's



Apparently, we're using HBAnywhere:

(416) >>                   pkginfo -l  HBAnyware

   PKGINST:  HBAnyware

      NAME:  Emulex HBAnyware FC Host Bus Adapter Remote Manager

  CATEGORY:  system

      ARCH:  sun4u

   VERSION:  2.0a16

   BASEDIR:  /

    PSTAMP:  utilsun0320040525101537

  INSTDATE:  May 05 2005 23:12

    STATUS:  completely installed



 [/]11:13:18 >> ls /usr/sbin/lpfc/

convert_path_lpfc  dfc32              lputil             lputil64
update_lpfc

dfc                dfc64              lputil32           resetqdepth

[/]11:13:18 >>



I can run the lputil cmd to show any necessary output...thanks

Joe Beck Ciber Inc. - a consultant to SEI  One Freedom Valley Drive |
Oaks, PA 19456 | p: 610.676.2258 | jbeck@seic.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Fri Jun 9 15:27:44 2006

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:58 EST