SUMMARY: SRS Net Connect / Excluding SCSI devices

From: <>
Date: Fri Aug 26 2005 - 08:52:43 EDT
Nobody could suggest a method to prevent SRS Net Connect attempting to check
on devices that were expected to have non-Solaris labels.

It was pointed out that you can limit device visibility at various points on
a SAN but that cannot be done in my situation.

On Wed, Aug 24, 2005 at 11:38:29AM +0100, wrote:
> We have SRS Net Connect installed on a number of Solaris9 systems in a
> cluster.  The cluster uses a fibre attached storage array and qlogic HBAs to
> provide LUNs to the cluster members.
> A few of the servers in the cluster are running Linux and Win2000 and they
> to make use of LUNs on the storage array.
> Unfortunately, all the LUNs are visible on all servers (a mistake I hope to
> avoid next time.) When SRS Net Connect checks the state of the SCSI devices,
> it sees all the LUNs and tries to check the labels.  Of course, the labels
> for the LUNs connected to non Solaris systems are not as expected and it
> spits out many warnings to the messages file.
> I've scanned all the online docs for SRS Net Connect but can't find any way
> to exclude some devices from its scans.
> Is there any way to exclude a list of devices from those that SRS Net
> Connect scans?
> Thanks,
> -- 
> | Geoff. Lane | ITs | Manchester | M13 9PL | England |
> Today's Excuse:  Fatal error right in front of screen
> _______________________________________________
> sunmanagers mailing list

| Geoff. Lane | ITs | Manchester | M13 9PL | England |

BREAKFAST.COM Halted... Cereal Port Not Responding.
sunmanagers mailing list
Received on Fri Aug 26 08:53:24 2005

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:51 EST