Summary: SUn t3 stoarge firmware upgradation

From: sanjay K <>
Date: Wed Aug 17 2005 - 07:33:18 EDT
Hi All,

Thanks for sharing  the information ,

as the T3 setup is up & running & its on RAID 0 , so it was very critical
for such activity.

Any way did the activity successfully as per the procedures in the patch
109115-17 readme file.

Accordingly 1) run the script , it will upload the firmware files
to T3

2) run the commands as in the README file of this patch .




--- Prasanth Mudundi <> wrote:

From: Prasanth Mudundi <>
Date: Sun, 14 Aug 2005 02:17:24 -0400
Subject: Re: SUn t3 stoarge firmware upgradation

set the IP ADDRESS on the T3 via the serial ports. ( the set commands
are close... look at the docs.)
set ipaddress x.x.x.x
set netmask x.x.x.x
set gateway x.x.x.x
set hostname abcd.
passwd -> set the password.

hook them to the network.
download the latest firmware from sunsolve.
put it in the same net works as the t3 ( if you dont have gateway)
ping the t3
if successful.... run after extracting. just follow the prompts.
after upload completes.

ep download <newfirmware>

you are done.
if you have them PP config. you have to do it once. both controllers
get done.
repeat process for each array... never had an issue. see the readme file
for more info.

hope that helps
prasanth - sysadmin

sanjay K wrote:

>Hi All,
>We have as cluster setup with two V880 nodes , two Sun T3 storage.
>T3 firmware version is 1.18.00 & it is recommended to upgrade it to
>latest one as frequent disk failure are occured.
>Kindly pls. share the experience of T3 firmware upgradation activity if
>any one has done
>Thanks in advance,
>_______________________________________ ________
>sunmanagers mailing list
> lman/listinfo/sunmanagers
sunmanagers mailing list
Received on Wed Aug 17 07:33:55 2005

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:50 EST