Re: E 450 power up issues SUMMARY

From: Steve Rieger <steve.rieger_at_tbwachiat.com>
Date: Tue Dec 07 2004 - 10:20:02 EST
The two micro switches in the back were working fine., the little points on
the side panels were not contacting them though. So I just pushed those two
points pout a bit and made sure that they are contacting properly. All is
good now Thanx to you guys





On 12/6/04 11:06 AM, "Steve Rieger" <steve.rieger@tbwachiat.com> wrote:

> Hi all, 
> 
> I recently (a week ago) to delivery of an e450, my intentions were to learn
> a bit more of the Solaris env that I have not had a chance to dig into as of
> yet.
> 
> I installed the os and patched it . Then I opened the covers and added
> another disk board. And now the box will not power up. I get two good led's
> on the power supply and also internally I get one led when the power is
> plugged in. the two micro switched that only get activated when the side
> panels are closed are ok, and as a backup I taped them in the closed
> position just to see if the system would boot up. But no.
> 
> 
> Any ideas as to where to look next.
> --
> Steve Rieger
> Direct 212-804-1131
> Cell 646-335-8915
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
> 

--
Steve Rieger
Direct 212-804-1131
Cell 646-335-8915
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Dec 7 10:43:37 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:40 EST