SUMMARY: Ultra 10 will not recognize new NIC

From: Eric Sisson <ems_at_mdacc.tmc.edu>
Date: Mon Nov 29 2004 - 16:21:27 EST
Greetings, all,

This is a summary of the responses I received to my posting about 
using a 3Com 3C905 PCI Ethernet card in an Ultra 10 (original message 
below).

Apparently, the 3C905 is meant only for Intel-based systems and not 
for SPARC systems.  It was worth a try since it was lying around, but 
it appears that the group will need to purchase a Sun PCI NIC.

I did receive pointers to some web sites that could have useful 
information.  I have not had a chance to check these, yet.  For the 
record (and for the benefit of anybody who finds this message in the 
archives), they are the following:

     http://homepage2.nifty.com/mrym3/taiyodo/eng/

     http://www.confusioncentral.com/ethernet/ethernet.html

 
http://www.3com.com/products/en_US/searchbyfile.jsp?fileid=all&os=22912&sort=prodnum&fname=&prodcat=19&path=download

Thanks go to the following for very prompt and informative responses:

     Jacob Rieper
     J. Oquendo
     Jeremy Loukinas
     Russell Poffenberger
     Matt Ungaro
     Darren Dunham

I appreciate everybody's time.

Regards,
Eric Sisson
--
Eric M. Sisson, Senior Research Programmer        email: ems@mdacc.tmc.edu
Academic and Research Computing - Box 235         voice: 713-792-2629 or
University of Texas M. D. Anderson Cancer Center         713-792-2618
1515 Holcombe Boulevard                             fax: 713-745-0615
Houston, Texas  77030-4009



Original message:

>I am working with a group that has an Ultra 10, running Solaris 8, 
>on which the onboard Ethernet has died.  Unfortunately, they let the 
>hardware maintenance lapse, so we are trying to fix it ourselves. 
>We grabbed a 3Com 3C905 card from a stash of parts and plugged that 
>into one of the PCI slots, intending to use that.  However, it is 
>not working, and that is the reason for this post.
>
>The lights on the card glow when an Ethernet cable is connected to 
>it, so the card appears to be good.  However, entering ``show-nets'' 
>at the ``ok'' prompt lists only the onboard interface.  When we boot 
>the system and enter command ``prtconf'', we see the following (in 
>part):
>
>     pci, instance #1
>       ...
>       ethernet (driver not attached)
>
>When we remove the card and do a ``boot -r'', the ``ethernet ...'' 
>line disappears from the output, so that line does refer to the 
>3C905.  I have tried entering ``ifconfig plumb'', but that seems to 
>have no effect.  Clearly, we are missing something.
>
>Does anybody have any experience with 3C905 (or related) cards in an 
>Ultra 10 or other SPARC system?  Should I be doing something else or 
>extra?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Mon Nov 29 16:21:50 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:40 EST