SUMMARY: flar to tape : write: not modulo 2 device granularity error

From: Rob McDonnell <robert.mcdonnell_at_let.uu.nl>
Date: Mon Aug 30 2004 - 05:10:05 EDT
Hi All,

OK I got zero replies but for completeness my solution was to use the 
following syntax:

#flarcreate -n "some archive name" -t /dev/rmt/0c

ie /dev/rmt/0c not /dev/rmt/0

Looks like you need to completely specific the tape device, I guess 0h 
etc work too.

Cheers,

Rob

Rob McDonnell wrote:

> Hi All,
>
> I am having some issues writing a flash archive to tape :
>
> Tape is:
> #mt status
> Vendor 'COMPAQ  ' Product 'DLT8000        ' tape drive:
> sense key(0x0)= No Additional Sense   residual= 0   retries= 0
> file no= 0   block no= 0
>
> OS is:
> SunOS <system> 5.9 Generic_112233-12 sun4u sparc SUNW,Sun-Fire-V240
>
> Flar command is:
> #flarcreate -n <system>  -t /dev/rmt/0
> WARNING: hash generation disabled when using tape (-t)
> Full Flash
> Checking integrity...
> Integrity OK.
> Running precreation scripts...
> Precreation scripts done.
> Determining the size of the archive...
> 11358516 blocks
> The archive will be approximately 5.41GB.
> Creating the archive...
> 11358516 blocks
> ERROR: Unable to write archive.
>
> /var/adm/messages says:
> Aug 27 10:59:37 <system> scsi: [ID 107833 kern.warning] WARNING: 
> /pci@1c,600000/scsi@2,1/st@6,0 (st13):
> Aug 27 10:59:37 <system>         write: not modulo 2 device granularity
>
> I probably need to use the position -p and blocksize options -b
>
> Anyone seen this before.
>
> Kind Regards,
>
> Rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Mon Aug 30 05:10:01 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:37 EST