SUMMARY: Copy flash archive from tape

From: Peter Guthrie <peter_at_unixplanet.co.uk>
Date: Wed Jul 07 2004 - 14:41:54 EDT
Bill R. Williams wrote:

>Hi Peter,
>
>I'm guessing that you need a 'bs=' on the dd.
>Apparently, 'dd' has some internal default for the buffer it will use
>if you do not specify [io]bs.  Since you are reading from tape and
>writing to disk, the 'bs=' only matters to the 'dd' for buffering
>purposes.  Pick the biggest number you think you'll need for a tape
>block.  (The biggest blocksize the tape can have.)
>
>Most likely this'll do it:
>dd if=/dev/rmt/0mn of=/SOMEWHERE/taped.flar bs=128k
>
>  
>

Thanks Bill, setting the block size did the trick.

Peter
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Jul 7 14:42:31 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:34 EST