"SUMMARY : CPU Performance"

From: Michael Mac <MMac_at_lexarmedia.com>
Date: Tue Jun 15 2004 - 12:29:03 EDT
-----Original Message-----
From: Michael Mac
Sent: Monday, June 14, 2004 10:19 AM
To: Michael Mac; sunmanagers@sunmanagers.org
Subject: RE: CPU Performance

Hi All,

Sorry for not getting the chance to summerize. By default with Solaris
scheduling, my simulation CAD jobs will bind to a one cpu per job since
they are not multi-threaded. It ultizes that cpu to the fullest. There
is a command under Solaris that creates and manages the processor sets
"psrset"

Psrset would be more ideal in a case where there's four or more
processors. I can then setup a certain amount of cpu's for CAD jobs, but
in my case I only have dual processors and it wouldn't make sense to set
this up.

Thanks,

Michael




-----Original Message-----
From: Michael Mac
Sent: Friday, June 11, 2004 2:42 PM
To: sunmanagers@sunmanagers.org
Subject: CPU Performance

Hello,

My question pertains to Sun CPU in general. I was unable to find
documents about this and I thought maybe someone here would know.

In a case where a system has dual cpu's, by default will it allocate all
the necessary process power to a application that is cpu intensive. In
other words, will it only use one of the two cpu's or will it use both
at the same time. I have noticed on all of my machines (V210)  which
runs CAD simulations has consistent of about 50% per job and 100% with
two jobs running. What are the default cpu settings on these servers and
solaris 8?
Would it be possible to utilize most of the cpu on the first job that
starts making it finish at a faster time?

Thanks

Michael
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Jun 15 12:28:57 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:32 EST