SUMMARY: Configure X6767A to connect ESS 2105-F20 on V880

From: Shen Yuguo <shenyg_at_ihpc.a-star.edu.sg>
Date: Tue Mar 23 2004 - 10:19:42 EST
Actually not much to summarize :)

Thanks for those who reply, and those out-of-office message also. 

Special thanks to Daniel Wilkinson, he gave me the cfgadm command and it
works !!!

cfgadm -la 
 shows the card is actually on controller 2 (c2), connected but
unconfigured. 

then,
cfgadm -c unconfigure c2
cfgadm -c configure c2    # <-- this is the magic 

Now the disk is detected by format, he also told me that target of disk
will be the WWN, no way to change it. I am happy already.

Thanks all again. 

Shen Yuguo

On Mon, Mar 22, 2004 at 09:51:18PM +0800, Shen Yuguo wrote:
> Hi gurus,
> 
> We have a newly purchased V880 with Fibre Card (X6767A, said to be
> QLA2310). When connected to IBM ESS 2105-F20, from the OK prompt, we can
> use "probe-scsi-all" to detect allocated disk on ESS, but when boot to
> OS (Solaris 9 with latest patch), no disk will be discovered. 
> 
> I've tried to installed IBM-approved QLogic driver 4.13, but after
> reboot -- -r, the card is still driven by SUNWqlc, not QLA2300. 
> 
> Hope you guys can point me to the right documents about the
> configuration of qlc.conf or how to change to use qla2300.conf
> 
> Thanks and I will summarize ...
> 
> Shen Yuguo
> -- 
> A wise man can see more from the bottom of a well than a fool can from a
> mountain top.
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Mar 23 10:27:17 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:30 EST