SUMMARY: High rate of input errors on GE interface

From: V S <vvsap_at_yahoo.com>
Date: Wed Mar 03 2004 - 12:51:32 EST
My original message is at the bottom.  I've got no
answers from the mailing list, and only when I opened
service case with SUN Support I've got a solution:

they recomended to enable recieve and transmit pause:

ndd -set /dev/ge adv_pauseRX 1
ndd -set /dev/ge adv_pauseTX 1
 
(it looks like the second setting disabled by default)

Now I can go as fast as 75-80 Mbyte/s without any
errors.

regards,
Vladimir.

--- V S <vvsap@yahoo.com> wrote:
> Hello Everyone,
> 
> 
> I'm running Solaris 8 on E3500 (8 x 400MHz cpu, 4GB
> mem, two gigabit NICs).
> The system is receiving data from about 20 external
> sources 0.5-1.5 MByte/s each (12-20 MByte/s total)
> using one gigabit interface, and then sending out
> processed data using another gigabit interface.
> 
> The problem: 
> 
> input interface is having very high rate of input
> errors
> 
> # netstat -I ge0 1 
>  
> gives 10 errors/s (mean value), while there is no
> errors on the switch side (no negotiation problems) 
> nor on output interface (almoust the same data rate
> but with one stream only).
>  
> It doesn't depend from NICs nor cables. 
> 
> The system is not overloaded: load average is about
> 4.4
> 
> Is it a know problem of ge driver?
> 
> can anyone help me troubleshoot this?
> 
> thanks,
> Vladimir.
> 



__________________________________
Do you Yahoo!?
Yahoo! Search - Find what youre looking for faster
http://search.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Mar 3 12:51:15 2004

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:30 EST