SUMMARY: Changing scsi host ID Sun Storedge PCI Dual Ultra3

From: Tyler Hardison <tyler_at_seraph-net.net>
Date: Thu Sep 25 2003 - 15:03:20 EDT
Thanks to Drew Skinner with the quick and correct response, rather then 
paraphrase I've included his message for the archives:

** Begin Instructions **

Hi Tyler;

Here's the quick and dirty.

On one of the two hosts do the following:

1) Get to an OK prompt. Then run a reset-all followed by a 
probe-scsi-all to get your device id's
2) Edit your nvramrc (those docs are on docs.sun.com - just search for 
nvramrc
3) Run an nvstore. setenv use-nvramrc? to true.
4) Reconfigure reboot

Sample from one of my systems and it's nvram settings:

nvramrc=devalias altboot /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@3,0
devalias bootdisk /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0
probe-all install-console banner
cd /pci@9,700000/scsi@4
6 " scsi-initiator-id" integer-property
device-end
cd /pci@8,700000/scsi@5
6 " scsi-initiator-id" integer-property
device-end
banner

The first two lines are the boot disks. The real stuff for this begins 
with the probe-all
and ends with the banner statement. Control C will get you out of 
nvedit.

All the best,


Drew.

On Thu, 25 Sep 2003, Tyler Hardison wrote:
>
>> Hello Managers,
>>
>> I have the need to change the SCSI host ID on the Sun StorEdge PCI 
>> Dual
>> Ultra 3 SCSI adapter. This is to facilitate setting up a "poor-mans HA
>> cluster". If anyone is familiar with a procedure or location of
>> documentation it would be greatly appreciated!
>>
>> Thanks
>>
>> Tyler Hardison
>> Systems Administrator
>> The Modesto Bee
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Sep 25 15:03:15 2003

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:43:22 EST