SUMMARY: Jumpstart with Disksuite Mirroring

From: Blair Rampling <brampling_at_radiant.net>
Date: Wed Sep 05 2001 - 13:30:45 EDT
Here is the appropriate script:

#!/bin/sh

ODSINIT=/etc/rc2.d/S78disksuite
METABIN=/usr/opt/SUNWmd/sbin
DISK1=c0t0d0
DISK2=c0t2d0

echo ""
echo "###Creating the file $ODSINIT for configuring ODS###"
echo ""

echo "#!/sbin/sh

if test -f /config.ods.1
then

     $METABIN/metadb -a -f -c 3 ${DISK1}s7 ${DISK2}s7

     echo \"Preparing the / partition\"
     $METABIN/metainit -f d10 1 1 ${DISK1}s0
     $METABIN/metainit d20 1 1 ${DISK2}s0
     $METABIN/metainit d0 -m d10
     $METABIN/metaroot d0

     echo \"Preparing the swap partition\"
     $METABIN/metainit -f d11 1 1 ${DISK1}s1
     $METABIN/metainit d21 1 1 ${DISK2}s1
     $METABIN/metainit d1 -m d11

     echo \"Preparing the /var partition\"
     $METABIN/metainit -f d12 1 1 ${DISK1}s3
     $METABIN/metainit d22 1 1 ${DISK2}s3
     $METABIN/metainit d2 -m d12

     echo \"Preparing /etc/vfstab. Backup in /etc/vfstab.orig\"

     cp /etc/vfstab /etc/vfstab.orig

     echo \"#device         device          mount           FS      fsck 
    mount   mount
#to mount       to fsck         point           type    pass    at boot 
options
#
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr          ufs     1       yes     -
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d1       -       -       swap    -       no      -
/dev/md/dsk/d0       /dev/md/rdsk/d0      /       ufs     1       no 
   logging
/dev/md/dsk/d2       /dev/md/rdsk/d2      /var    ufs     1       no 
   logging,nosuid
swap    -       /tmp    tmpfs   -       yes     nosuid
\" > /etc/vfstab.meta

     lockfs -fa

     if [ -r /dev/md/dsk/d0 ]; then
         cp /etc/vfstab.meta /etc/vfstab
     fi

     touch /config.ods.2
     rm /config.ods.1
     reboot
fi

if test -f /config.ods.2
then
     rm /config.ods.1
     reboot
fi

if test -f /config.ods.2
then
     echo\"\"
     echo \"Meta Attaching ODS devices...\"
     echo\"\"
     $METABIN/metattach d0 d20
     $METABIN/metattach d1 d21
     $METABIN/metattach d2 d22
     rm /config.ods.2
fi
" > /a/$ODSINIT

-----Original Message-----
From: Blair Rampling [mailto:brampling@radiant.net]
Sent: Wednesday, August 29, 2001 9:59 AM
To: sunmanagers@sunmanagers.org
Subject: Jumpstart with Disksuite Mirroring


 

*** PGP Signature Status: good
*** Signer: Blair Rampling <brampling@radiant.net>
*** Signed: 8/29/2001 9:58:58 AM
*** Verified: 8/31/2001 12:56:15 PM
*** BEGIN PGP VERIFIED MESSAGE ***

Is it possible to create a jumpstart configuration which
automatically installs disksuite and mirrors the two hard disks in a
system? I figure I could do it by adding the meta commands in a
finish script, but I was wondering if other people have done it so I
can minimize the amount of pain I have to experience.

Thanks!


- --
Blair Rampling
Senior Systems Administrator
Radiant Communications 


*** END PGP VERIFIED MESSAGE ***
Received on Wed Sep 5 18:30:45 2001

This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:32:30 EDT