UPDATE: Upgrade of E450

From: Christopher Ciborowski <Chris.Ciborowski_at_exodus.net>
Date: Tue May 22 2001 - 15:18:36 EDT
> Thanks to all that have replied on this one.  As always, good info in
> about 5 minutes.=20
>=20
> I have done a couple things as suggested (No NFS mounts, boot -v, =
remove
> DNS entries from nsswitch.conf, etc.), but I am hanging still.  Here =
is
> the boot -v output:
>=20
> {3} ok boot -v
> Resetting ...=20
>=20
>=20
> Can't open input device.
> screen not found.
> Can't open input device.
> Keyboard not present.  Using ttya for input and output.
> Keyboard not present.  Using ttya for input and output.
>=20
>=20
> Sun Enterprise 450 (2 X UltraSPARC-II 400MHz), No Keyboard
> OpenBoot 3.14, 1024 MB memory installed, Serial #11956067.
> Ethernet address XX:XX:XX:XX:XX:XX, Host ID: --------.
>=20
>=20
>=20
> Rebooting with command: boot -v                                       =

> Boot device: /pci@1f,4000/scsi@3/disk@0,0  File and args: -v
> Size: 329288+88129+64023 Bytes
> SunOS Release 5.8 Version Generic_108528-03 64-bit
> Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.
> Ethernet address =3D XX:XX:XX:XX:XX:XX
> mem =3D 1048576K (0x40000000)
> avail mem =3D 1026555904
> root nexus =3D Sun Enterprise 450 (2 X UltraSPARC-II 400MHz)
> pcipsy0 at root: UPA 0x1f 0x4000
> pcipsy0 is /pci@1f,4000
> pcipsy1 at root: UPA 0x1f 0x2000
> pcipsy1 is /pci@1f,2000
> pcipsy2 at root: UPA 0x4 0x4000
> pcipsy2 is /pci@4,4000
> pcipsy3 at root: UPA 0x4 0x2000
> pcipsy3 is /pci@4,2000
> pcipsy4 at root: UPA 0x6 0x4000
> pcipsy4 is /pci@6,4000
> pcipsy5 at root: UPA 0x6 0x2000
> pcipsy5 is /pci@6,2000
> /pci@1f,4000/scsi@3 (glm0):
>         Rev. 3 Symbios 53c875 found.
> PCI-device: scsi@3, glm0
> glm0 is /pci@1f,4000/scsi@3
> /pci@1f,4000/scsi@2 (glm1):
>         Rev. 3 Symbios 53c875 found.
> PCI-device: scsi@2, glm1
> glm1 is /pci@1f,4000/scsi@2
> sd0 at glm0: target 0 lun 0
> sd0 is /pci@1f,4000/scsi@3/sd@0,0
>         <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
> sd1 at glm0: target 1 lun 0
> sd1 is /pci@1f,4000/scsi@3/sd@1,0
>         <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
> sd21 at glm1: target 6 lun 0
> sd21 is /pci@1f,4000/scsi@2/sd@6,0
> root on /pci@1f,4000/scsi@3/disk@0,0:a fstype ufs
> PCI-device: ebus@1, ebus0
> envctrl0 at ebus0: offset 14,600000
> envctrl0 is /pci@1f,4000/ebus@1/SUNW,envctrl@14,600000
> su0 at ebus0: offset 14,3083f8
> su0 is /pci@1f,4000/ebus@1/su@14,3083f8
> su1 at ebus0: offset 14,3062f8
> su1 is /pci@1f,4000/ebus@1/su@14,3062f8
> se0 at ebus0: offset 14,400000
> =FAcpu1: SUNW,UltraSPARC-II (upaid 1 impl 0x11 ver 0xa0 clock 400 =
MHz)
> cpu3: SUNW,UltraSPARC-II (upaid 3 impl 0x11 ver 0xa0 clock 400 MHz)
> configuring IPv4 interfaces:SUNW,hme0 : PCI IO 2.0 (Rev Id =3D c1) =
Found
> PCI-device: network@1,1, hme0
> hme0 is /pci@1f,4000/network@1,1
> SUNW,hme1 : PCI IO 2.0 (Rev Id =3D c1) Found
> SUNW,hme1 : Local Ethernet address =3D 8:0:20:cc:37:e0
> PCI-device: SUNW,hme@4,1, hme1
> hme1 is /pci@1f,4000/SUNW,hme@4,1
>  hme0.
> Hostname: XXXXXX
> dump on /dev/dsk/c0t0d0s3 size 1500 MB
> SUNW,hme0 : Internal Transceiver Selected.
> SUNW,hme0 : Auto-Negotiated  100 Mbps Full-Duplex Link Up
> pseudo-device: devinfo0
> devinfo0 is /pseudo/devinfo@0
> The system is coming up.  Please wait.
> PCI-device: SUNW,ma@3, ba0
> ba0 is /pci@6,4000/SUNW,ma@3
> pseudo-device: aar0
> aar0 is /pseudo/aar@0
>=20
> Any new ideas?
>=20
> Thanks,
> Chris
>  -----Original Message-----
> From: 	Christopher Ciborowski =20
> Sent:	Tuesday, May 22, 2001 11:22 AM
> To:	'sunmanagers@sunmanagers.org'
> Subject:	Upgrade of E450
>=20
>=20
> All,
>=20
> I have upgraded an E450 from Solaris 7 to Solaris 8, and the machine =
is
> hanging.  I tried booting the 32bit kernel, to no avail.  Here is the
> console output.  Any help is appreciated.  I will summarize.
>=20
> Thanks,
> Chris
>=20
> {1} ok boot
> Boot device: disk  File and args: kernel/sparcv9/unix
> SunOS Release 5.8 Version Generic_108528-03 64-bit
> Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.
> configuring IPv4 interfaces: hme0.
> Hostname: XXXXX
> The system is coming up.  Please wait.
>=20
>=20
Received on Tue May 22 20:18:36 2001

This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:24:55 EDT