SUMMARY: Moving A Complete System To An Other Machine

From: Pavlo Baron <pb_at_pbit.org>
Date: Sun Dec 02 2001 - 10:03:53 EST
Well, i don't know if this summary is relly something interesting for
sun-gurus, but here it comes.

First of all, a special "THANK YOU" to:

Edward C. Zimmermann <edz@bsn.com>
Dylan Northrup <northrup@loudcloud.com>
Rick Dipper <rick@UnglaublichIT.com>
Ric Anderson <ric@Opus1.COM>
Bill Mooney <bmooney@seflin.org>

Here is my original question:

-------------------------------------------snip-----------------------------
-----------------
is it possible to move a hard disk with a completely installed Solaris2.8
from one U5-SPARC-machine to an other which is absolutely identical
(identical hardware)?
Is there something i must re-configure before or after such action? All
system and network settings would be the same, but would Solaris2.8
re-configure itself automatically from the hardware-ids and so on?
-------------------------------------------snap-----------------------------
----------------

ok, there seems to be an easy and a hard way. I'll take the first one,
because that's the way i would have chosen if i didn't post my question.
Most of you said, it's ok just to swap hard disks - i'll try it tonight
(DE), we will see ,-) If the new hard disk has been swapped, boot -r would
do it - that's the easy one!

Edward C. Zimmermann additionally wrote:

-------------------------------------------snip-----------------------------
------------------
Main issue is with early U1 where
one sets a flag, by default, to run the kernel in 32-bit modus due to a bug
in the processor that can hang on a specific sequence of instructions.
-------------------------------------------snap-----------------------------
------------------

Dylan wrote:

-------------------------------------------snip-----------------------------
------------------
Also, make sure that all the
peripheral cards (i.e. qfe cards, scsi cards, etc) are in the identical slot
on the new machine as they were on the old).
-------------------------------------------snap-----------------------------
------------------

Bill's way seems to be the hard one and it's surely perfect if you want to
clone a system:

-------------------------------------------snip-----------------------------
------------------
ufsdump each partition on original machine to tape.
boot new machine from CD-ROM.
partition disks in new machine like the original.
ufsrestore each partition to new machine.
use "installboot" to install boot block.
reboot.
Note: the new machine will have same IP, etc
as old machine so you should do a "sys-unconfig"
to reset these.
-------------------------------------------snap-----------------------------
-----------------

Here a tip from Ric:

-------------------------------------------snip-----------------------------
-----------------
If you have licensed software (e.g., Forte C compiler, Mathematica, etc.)
then those applications will not work until you get updated license keys
based on the new hardware ID.
-------------------------------------------snap-----------------------------
-----------------

thanks and cu

Pavlo
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Sun Dec 2 09:02:18 2001

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:29 EST