Summary: Question: How to setup a station to sync to a time server ?

From: Yen-Wen Chen (yen@n0sun3.ccl.itri.org.tw)
Date: Mon Feb 20 1995 - 00:29:44 CST


Hi, Sun Managers:

Thanks to:
manjeet <manjeet@cadence.com>
Yehuda Bamnolker <bamby@Scorpio.Com>
Michael E. Tonn <met@leis.leis.bellcore.com>
Kevin A. Noll <kan@crc.com>
Brian T. Wightman <wightman@sol.acs.uwosh.edu>
Steve Ozoa <sozoa@atmel.com>
Douglas Chen <dougc@lsi.sel.sony.com>
<mike@trdlnk.com>
Rick <rnf%spitfire@galaxy.tbird.com>
Arve Kjoelen <kjoelena@shiva.ee.siue.edu>
Chris A. Wozniak <chris@tisc.edu.au>

    If I loss list some people who give me suggestion, I am sorry.

1. Most of them subject me to use "rdate" command: < SUN boundle command >
    rdate "your time_server" ;

    You can add this command in /etc/rc.local or cron table

    Note: rdate is implemented by OLD NTP.

2. add "ntpdate" in crontable.

3. use xntp, available via anonymous FTP from louie.udel.edu.

---------------------------------------------------------------
Yen-Wen Chen | internet : yen@n0sun4.ccl.itri.org.tw
ITRI/CCL | Tel : 886-35-917562
System Engineer | Fax : 886-35-820081
---------------------------------------------------------------
Address : N200, Bldg. 14, 195 Sec 4, Chung Hsing Rd., Chutung,
          Hsinchu, Taiwan 310, R.O.C.
---------------------------------------------------------------



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:16 CDT