SUMMARY: Install Sol2.3 on CMD,LUN=1

From: Andreas.Stoll@deejai.mch.sni.de
Date: Tue Jan 17 1995 - 22:21:54 CST


Dear Sun-Managers,

The question:
>I have a probplem with the CMD controller (two disks under
>the same Controller/Target. I found out that I can use
>/dev/dsk/c0t3d1s* after adding LUN=1 entries in /kernel/drv/sd.conf.
> ^
>But I have a running system on LUN=0 and I want to install a new
>system on LUN=1. Is there a way to tell the Boot-Install procedure
>from CDROM to create devices, install and configure on LUN=1 ?

The answers (all of them, by now...)

mark@ccifl.com:

You might try setting the boot device in the EEPROM.

leif@infoseek.com:

As far as I know, NO!!! I have a similar problem, with one of my RAID
disk systems.

I've complained about this to the SCSI lead engineer at Sun, and he was
kind enough to file (or prioritize) a "bug report" about it. It might be
changed in Solaris2.5, which is supposed to be out in the summer of '95.
-------------------------------------------

Thank you very much for your response Leif and Mark.

Andreas



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:10:14 CDT