A while back I posted asking if anyone saw the following:
vmunix: esp0: Current command timeout for Target 3 Lun 0
vmunix: sd0: SCSI transport failed: reason 'reset': retrying command
vmunix: esp0: Target 1 now Synchronous at 4.0 mb/s max transmit rate
I got 15 or so responses and I appreciate all of them!!!!!!!!!!!!!!!!
They all suggested to check the connections of the scsi cables
and/or make the cables smaller.
I replaced the cables with shorter ones that I just received and
that cleared up the problem. Thanks again!
Joe Ledva |---&---| Every guy grab a girl
email@example.com /| |\ for dancin in the
|- -| streets
_/ \ / \_
This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:20 CDT